please fill out the form. We're ready to receive your message.

KNX Master (Slave) Curtain Control Motor is a curtain controller controlled by a panel or other device, and includes host and slave. The Master (Slave) Curtain Control Motor supports manual mode, and overheat protection.
KNX Master (Slave) Curtain Control Motor is a curtain controller controlled by a panel or other device, and includes host and slave. The Master (Slave) Curtain Control Motor supports manual mode, and overheat protection.
■ Standard control (with percentage)
■ Simple control (without percentage)
■ Automatic distance measurement
■ Manual mode: Long drag, short drag.
■ Control to open, close, stop and percentage open/close.
■ Position and status response (open, close, stop, percentage, limited position, etc.)
■ Status recovery upon power on.
■ Safety control: Control the curtain position according to wind, rain, frost signal
■ Auto control: Control the curtain position according to sun status, heating, cooling signal
■ Scene control
■ Forced position operation
■ Trigger control
■ Status save when power off
Basic Parameters
Model M/WM70M.1 (Master) M/WM70S.1 (Slave)
Working voltage 21-30V DC (Master) 12V DC (Slave, from Master) Working current 10mA/30V DC (Master)
Input voltage 220V AC 50Hz
Communication KNX (Master)
Slave interface 6P network port
Rated power 70W
Rated torque 1.0N.m
Rated speed 112rpm
Rail belt speed 16cm/s
External Environment
Working temperature -5℃~45℃
Working relative humidity ≤90%
Storage temperature -20℃~60℃
Storage relative humidity ≤93%
Specifications
Dimensions 284×70×50(mm)
Net weight
1554g(master) 1543g(slave) Housing material ABS, aluminum
Installation Wall mounting
Insulation rating E
Protection rating (Compliant with EN 60529) IP41
KNX Blinds Motor 220V AC controls the roller blind travel up/down, travel up/down to a specified percentage position by receiving a KNX signal.
KNX Curtain Motor 220V AC / KNX Curtain Motor with Adapter is a curtain controller controlled by a KNX panel or other KNX device. The motor can be widely used at home, office, hospital and hotel etc.
KNX 4CH 10A Curtain Actuator is in full compliance with Chinese and European safety standards and KNX protocol. This series of products have the characteristics of high power (10A), low consumption and high reliability.